Drill
Visual Trigger Break and Reset Drill
A dry drill with the gun rolled over to watch the trigger: the wall, the break, and the reset, one hand at a time.
Pistol
Dry
Setup
A cleared gun and no live ammunition. Strong hand only, finger in register, and the gun rotated palm up so you can see the trigger.
Steps
5 steps- 1
Finger on the trigger. Press slowly to the wall and note where it is.
- 2
Press slowly through the break and note where it is.
- 3
Holding the trigger back, cycle the slide, turning the gun if you need to, and bring it back palm up.
- 4
Release slowly to the reset and note where it is. Repeat from the wall as often as you like.
- 5
Switch to the support hand only and do it all again.